How Do I Fix Cloudy Pool Caused by Too Much pH?

Cloudy water in your pool can be annoying, but if that cloudy water is due to an imbalance in your pool’s pH, that problem may always seem worse.

The good news is, while pH imbalance is responsible for a variety of problems with your pool water, correcting it is relatively easy—just follow a few simple steps. An important tool that can help you keep your pool water clean and avoid cloudiness is a robot pool cleaner. In this blog, we’ll explore how to correct a cloudy pool caused by high pH levels, the significance of pool cleaning robots, and how pH balance maintenance will prevent you from going down that cloudy pool road in the first place.

So why is my pool cloudy due to high pH?

Now before we get into the solution, it’s good to see the reason why high pH pool water becomes cloudy. The pH of pool water indicates the acidity or alkalinity of the water and is ideally between 7.2 and 7.8. When your pH level goes above this range, it can cause several problems, perhaps the most common of which is cloudy water.

And that's where you can see how high pH levels would cloud the water—when the alkalinity of the water is too high, calcium and other minerals will precipitate out, resulting in "cloudy" water droplets visible to the human eye. When pH is elevated beyond ideal levels, these particles stay suspended in water, resulting in a murky or cloudy water appearance. Now, let’s see how we can resolve this problem.

How to Treat a Cloudy Pool with High pH

Test Your Pool’s pH Level

Testing PH level is the first step in getting rid of cloudy pool water. You can either test your pool water with a kit or bring it to a local pool store where they also have test labs. If the pH is above about 7.8, it’s too high and has to be adjusted.

Use pH Reducer (Acid) to lower the pH

This is when you can use a pH reducer, muriatic acid, or sodium bisulfate, to bring the pH back into the ideal range if you discover it is high. Here’s how to use it:

Add pH Reducer: Use the dosage recommended on the product label for your pool size. It’s important to add the acid in small amounts to avoid over-correction.

Evenly distribute the chemical: The acid should be poured into the pool slowly, walking around the perimeter of the pool to help evenly distribute it. This would ensure that the acid is evenly distributed.

Be patient: Wait about a few hours after you add the acid before testing the water again to check that the pH is in the ideal range of 7.2 to 7.8. You might have to tweak it a bit, but don’t overdo the acid.

Keep the Run Your Pool’s Filter and Use a Robot Pool Cleaner

So once the pH has been adjusted, the next task is to clear up the cloudiness. You can accomplish this using your pool’s filtration system, which is one effective method of doing this. If your pool has a traditional filter, run the filter for several hours, which will aid in removing the particles that contribute to the cloudiness.

A robot pool cleaner will also get the job done quicker than a standard filter. A robot cleaner, such as the Beatbot AquaSense Pro, is made to suck up fine debris and particles that might be floating in your water. Just about any of the best robotic pool cleaners are highly effective at scrubbing the floor, walls, and waterline of a pool to rid it of debris, algae, and other particles, so they help clear up the water in no time.

This robot pool cleaner is self-contained, meaning it doesn’t upset your water chemistry while scrubbing the pool surface. In this case with cloudiness caused by algae or debris, the robot pool cleaner will do what it’s made for and help remove those particles which may be contributing to the cloudy water.

Check Pool’s Calcium Hardness

The calcium hardness may also rise with high pH, which may also contribute to cloudiness. When pH is too high, calcium can no longer be held in water and precipitates out of water; cloudy water results. When To Use A Calcium Hardness Reducer If you’re pool’s calcium hardness is high, you may want to use a calcium hardness reducer to control the process of scaling and clarify your water.

Test and adjust your calcium hardness level as needed, carefully following manufacturers’ instructions for any chemical treatments.

Skim the Pool Regularly

After ensuring that the pH levels are adequate, and after the filtration process has started, scoop up floating debris from the surface of the water with a pool skimmer. Regular skimming is an essential element of pool upkeep because debris can result in cloudy water. Regularly skim the surface of the water with a pool skimmer to prevent leaves, dirt, and other contaminants from clumping up on the surface and impacting clarity.

Keep Using Your Robot Pool Cleaner

Start with pH adjustment, then carrying on with your robot pool cleaner like the Beatbot AquaSense or Beatbot iSkim Ultra will do well to keep your pool clean and minimize the chances of the cloudiness returning. These types of cleaning robots are autonomous, doing the scrubbing along the pool’s surfaces, followed by gathering any leftover debris that might create problems for water clarity.

Achieving the pH Balance in a Clear Pool

Upon resolving this immediate issue of cloudy water from high pH, the next step is to maintain your pool's pH in the best range to prevent additional cloudiness and other water quality issues. Here are some tips on achieving the right pH level:

Test your water regularly: You should test the pH of the pool at least once a week to keep it within the ideal range (7.2 and 7.8).

Regularly use a pool cleaning robot: In addition to keeping your pool water clean, a robot will keep the amount of debris down, thus minimizing your chances of cloudy water.

Filtration – Make sure your pool’s filter is running effectively. Regularly clean the filter and backwash it to remove the trapped particles.

Balance other chemicals: Along with pH, check to make sure your pool’s alkalinity, calcium hardness, and chlorine levels are balanced. This will ensure your water stays in perfect shape and avoid problems such as cloudy water.

Conclusion

Learn How To Fix Cloudy Pool Water With High pH [Easy Process] Testing and balancing your pool’s pH, adding a pH reducer, running the filter, and enlisting the help of a robot pool cleaner can all help return your pool’s clarity.

Examples of amazing models are the Beatbot AquaSense Pro or the Beatbot AquaSense pool cleaner robots: Their remote control ends up being a tedious ordeal in removing debris, famed for its weed removal capabilities. By keeping the proper pH and having your pool cleaned regularly with the proper equipment, you will make sure that your pool doesn’t stay clear and ready for swimming the whole season.

It seems we can’t find what you’re looking for. Perhaps searching can help.